Product basic operation:

1. Boot: put on the power switch on the machine, long press A on remote control until the red light flashing at the same time, leave your hand machine long vibration, red and blue lights on, into the camera standby.
2. Camera: short press the remote control B, under the blue lights flashing three under vibration, all the lights went out, means into the video mode. Then short press the B button to save, this time blue light flashes three times, then red and blue lights on. Each video for 5 minutes automatically saved, automatically cycle after memory card full.
3. Photos: short press the remote control at the C key, blue light flashing once photograph. Cycle can take many photos in turn.
4. Motion detection: short press the remote control D, blue light flashing four times and then lights went out.
5. Lower electricity and no identify memory: vibration 6 times and lights went out.

Video while charging:

1. After electrify through the data line, blue light long light, red light flashing, fi the red lights stop flashing means full charge. Short press B blue lights flashing three times, three vibrations and went out, it’s recording, save as instructed.
2. Photo and motion detecting: in addition to the red light shows USB electricity long flashing, other operations like the basic operation.

Product parameters:

Resolution: 1920*1080/720P                                                    Memory: can up to 32G

Battery: 3800MA                                                                          Power dissipation: 220MA/H

Frame rate: 30fps                                                                         Distance control: 5-8m

Lens wide angle: 140degree/oem: 90degree                          Photo: 4032*3024

Battery: L*W*H: 98*43*10mm                                                  Lens line long: 15CM

Weight: 150g                                                                                  Device body: L*W*H/53*25*10mm

Note:

Change the time: set up a time .txt document in the memory, content such as: 2014.05.28 16:22:00, change the numbers when you change the time, and the save, video. Machine completely outage, time needs to be changed again.